Tamco Medium Backdraft Dampers

Home Manufacturers Learning Center About Careers

Medium Duty Backdraft Dampers

Series 7000

Series 7000 Medium-Duty, Maintenance-Free Backdraft Damper:

Ideal for installations requiring a maintenance-free backdraft damper, subjected to medium airflows and operating pressures.
Suitable wherever low-leakage performance is essential.

MR - Moisture Resistance Option:

Suitable for applications where dampers are exposed to extended periods of high humidity or high moisture, such as water treatment facilities, municipal pools, and greenhouses.
Cost effective alternative to the Salt Water Resistance Option for applications where salt spray is not a concern. (See Options for more details.)

SW - Salt Water Resistance Option:

Ideally suited for coastal climates.
Recommended for inland applications, where tire spray from winter-salted roads have been known to corrode dampers installed in close proximity to roads or highways.(See Options for more details.)

Series 7000 WT

Series 7000 WT Medium Duty, Maintenance-Free Weighted Backdraft Damper:

For installations where adjustable blade resistance is required to resist or delay opening.
Used to increase resistance to the opening of blades against airflow until a desired static pressure is achieved.

Series 7000

Series 7000WT

Series 7000 CW

Series 7000 CW Medium-Duty, Maintenance-Free Counterweighted Backdraft Damper:

Ideal for installations requiring a maintenance-free backdraft damper with field-adjustable pressure relief.
Used to accelerate opening of blades and designed to allow opening at lower pressures and airflow velocities.

MR - Moisture Resistance Option:

Suitable for applications where dampers are exposed to extended periods of high humidity or high moisture, such as water treatment facilities, municipal pools, and greenhouses.
Cost effective alternative to the Salt Water Resistance Option for applications where salt spray is not a concern. (See Options for more details.)

SW - Salt Water Resistance Option:

Ideally suited for coastal climates.
Recommended for inland applications, where tire spray from winter-salted roads have been known to corrode dampers installed in close proximity to roads or highways.(See Options for more details.)

Seris 7000CW

Heavy Duty Backdraft Dampers

Series 7600

Series 7600 Heavy-Duty Backdraft Damper:

Specifically designed for installations requiring a heavy-duty backdraft damper, subjected to elevated velocities and operating pressures.
Recommended for use in high-pressure isolation systems, air handling units, gen sets, and fan inlet or fan outlet locations.
They are an excellent solution whenever resistance to vibration in fan isolation systems or resistance to the effects of turbulent air is necessary.

ET - Elevated Temperature Option:

Suitable for high heat environments where temperatures may reach as high as 300°F (149°C),and where UL regulated control dampers are not a requirement.
For use in back-up generator stations, where excessive heat may be an issue.
For test laboratory applications, wherever high-heat conditions may exist.
A practical solution in mildly acidic applications, where Celcon bearings may not withstand environmental conditions.(See Options for more details.)

MR - Moisture Resistance Option:

Suitable for applications where dampers are exposed to extended periods of high humidity or high moisture, such as water treatment facilities, municipal pools, and greenhouses.
Cost effective alternative to the Salt Water Resistance Option for applications where salt spray is not a concern. (See Options for more details.)

SW - Salt Water Resistance Option:

Ideally suited for coastal climates.
Recommended for inland applications, where tire spray from winter-salted roads have been known to corrode dampers installed in close proximity to roads or highways.(See Options for more details.)

Series 7600

Series 7600CW

Series 7600

Series 7600 CW Counterweighted Heavy-Duty Backdraft Damper:

Used to accelerate opening of blades and designed to allow opening at lower pressures and airflow velocities.
Specifically designed for installations requiring a heavy-duty backdraft damper, subjected to elevated velocities and operating pressures.
Recommended for use in high-pressure isolation systems, air handling units, gen sets, and fan inlet or fan outlet locations.

ET - Elevated Temperature Option:

Suitable for high heat environments where temperatures may reach as high as 300°F (149°C),and where UL regulated control dampers are not a requirement.
For use in back-up generator stations, where excessive heat may be an issue.
For test laboratory applications, wherever high-heat conditions may exist.
A practical solution in mildly acidic applications, where Celcon bearings may not withstand environmental conditions.(See Options for more details.)

MR - Moisture Resistance Option:

Suitable for applications where dampers are exposed to extended periods of high humidity or high moisture, such as water treatment facilities, municipal pools, and greenhouses.
Cost effective alternative to the Salt Water Resistance Option for applications where salt spray is not a concern. (See Options for more details.)

SW - Salt Water Resistance Option:

Ideally suited for coastal climates.
Recommended for inland applications, where tire spray from winter-salted roads have been known to corrode dampers installed in close proximity to roads or highways.(See Options for more details.)

Series 7600CW

Series 7600 CWA

Series 7600 CWA Adjustable Counterweighted Heavy-Duty Backdraft Damper:

Ideal for installations requiring a heavy-duty backdraft damper with field-adjustable pressure relief.
Used to accelerate opening of blades and designed to allow opening at lower pressures and airflow velocities.
Specifically designed for installations requiring a heavy-duty backdraft damper, subjected to elevated velocities and operating pressures.
Recommended for use in high-pressure isolation systems, air handling units, gen sets, and fan inlet or fan outlet locations.

ET - Elevated Temperature Option:

Suitable for high heat environments where temperatures may reach as high as 300°F (149°C),and where UL regulated control dampers are not a requirement.
For use in back-up generator stations, where excessive heat may be an issue.
For test laboratory applications, wherever high-heat conditions may exist.
A practical solution in mildly acidic applications, where Celcon bearings may not withstand environmental conditions.(See Options for more details.)

Seres 7600 CWA

Series 8800

TAMCO Series 8800 Heavy-Duty Dampers are constructed with robust components to withstand up to 30” w.g. (7.5 kPa) of static pressure and velocities up to 5000 fpm (25.4 m/s).
They are designed for operation in temperatures ranging from -40°F (-40°C) to 300°F (149°C).
The innovative blade stop design increases free area. As a result, TAMCO Series 8800 pressure drop is significantly lower than that of industry standard heavy-duty dampers.
Series 8800 Dampers are constructed with all of the maintenance-free bearing and linkage components of other quality TAMCO products.
Assorted coatings and finishes can be applied to the Series 8800 Damper, further enhancing the range of applications for which this Series is suitable.

seies 8800