Haloguard
IR
hir
hir

hir
hir

1/1

The HALOGUARD ® IR combines advanced microprocessor based digital signal processing and a highly selective and sensitive photo acoustic infrared cell to provide the newest, most sensitive system for continuous monitoring of any refrigerant gas. The HALOGUARD ® IR monitors single or multiple, local and remote locations and provides notification when gas concentration reaches preset alarm levels. Add individual, simultaneous monitoring of up to 3 different gases and up to 24 sample points by adding optional channel scanners and remote IR modules. Alarm relays and analog outputs are designed to activate remote devices or to interface with an energy management (EMS) or building automation (BAS) system.

 
I/IR
h1ir-200px
h1ir-200px

h1ir-200px
h1ir-200px

1/1

The HALOGUARD® IR combines the HALOGUARD Microprocessor based controller and a highly selective andsensitive remote infrared module to provide the most
advanced system for detecting the presence of halocarbons.

The HALOGUARD® controller monitors the separate IR module in a remote location and provides both local and remote notification when gas concentration reaches preset
alarm levels.

Alarm relays and analog outputs are designed to activate remote devices or to interface with an energy management (EMS) or building automation (BMS) system.

 
II/IR
 
h2ir-300px
h2ir-300px

h2ir-300px
h2ir-300px

1/1

The HALOGUARD® II/IR combines microprocessor based controller with highly selective and sensitive remote photoacoutstic infrared modules to provide the most advanced system for detecting the presence of halocarbons.

The multichannel controller monitors IR modules or 02 sensors in up to six separate locations, then provides both local and remote notification when gas concentration reaches preset alarm levels.

Alarm relays and analog outputs are built in to activate remote devices or to interface with an energy management(EMS) or building automation (BMS) system.

HaloGuard
hguard
hguard

hguard
hguard

1/1

HALOGUARD ® is the cost effective, reliable way to reduce costly refrigerant leakage. With a HALOGUARD ® leak monitor installed, you quickly know where the leak is located and how much refrigerant you are losing. This exclusive early warning system detects leaks in a designated area and flashes a bright red LED when parts-per million (PPM) reaches the alarm level you preset. With a dialer or other remote signal hookup, maintenance personnel will know immediately when and where a leak occurs. Repairs can be made quickly, before you lose costly refrigerant or perishable products. An optional analog output is available to interface with EMS/BMS systems.

 
HaloGuard II
 
h2
h2

h2
h2

1/1

With dependable solid state electronics, HALOGUARD ® II is a cost effective, reliable way to detect the presence of halo- carbons, ammonia, and oxygen depletion. The multi-channel, multi-gas HALOGUARD ® II controller monitors sensors in up to six separate locations and provides both local and remote notification when gas concentration reaches an alarm level.

We ’ve built in alarm relays and analog outputs to activate remote devices or to interface with a computer controlled energy management or building automation system.

HaloGuard III
 
h3
h3

h3
h3

1/1

The HALOGUARD ® III combines advanced microprocessor based digital signal processing and a wideband photoacoustic infrared cell to provide the newest most advanced system for continuous monitoring of all refrigerant gases.

The HALOGUARD ® III monitors single or multiple,local and remote locations and provides notification when gas concen- tration reaches preset alarm levels.Up to 24 different gases may be monitored simultaneously by adding optional channel scanners and remote IR modules.

Alarm relays and analog outputs are designed to activate remote devices or to interface with an energy management (EMS)or building automation (BAS)system.